Complete Vacuum Tube Solar Water Heater System STH-200L
Vacuum Tube Solar Water Heater, Solar Water Heater System, Rooftop Solar Water Heater
Material of storage tank
Outer tank: colorful steel, 0.4mm thick
Inner Tank: SUS304, 1.5 mm
thick Insulation Polyurethane foam, 50 mm
working pressure: 6Bar
Daily efficiency: ≥55% (≥42% in winter)
working temperature :60°C ~ -35°C
vacuum tube specifications: 58mm*1800mm
lifetime:15 years
inlet/outlet:3/4″
Storage Tank |
Inner Tank | SUS304-2B food grade stainless steel |
Inner Tank Thickness | 1.5mm |
Outer Tank | PVDF 0.4mm which is good at anti corrosion |
Insulating Layer | Polyurethance Foam 50mm |
Inlet/outlet | 3/4" |
Vacuum Tube |
Material of the glass tube | Borosilicate glass |
Absorptive Coating Grade | ALN/AIN-SS/CU |
Length of Outer Tube | 1800mm |
Length of Inner Tube | 1755mm |
Outer Tube Diameter | 58mm |
Inner Tube Diameter | 47mm |
Glass Thickness | 1.6mm |
Distance between two tubes | 75mm |
Tube holder | UV stabilized nylon |
Seals | Silicon seal |
Thermal Expension | 3.3*10-6/º C |
Absorption coefcient | 95± 1 % |
Thermal emsision coefcient | 5 ± 1 % |
Vacuum | P≤ 5.0*10-3 Pa |
Stagnation Temperature | >200° C |
Average heat loss | <0.8w/ m2. ° C |
Maximum strength | 0.8Mpa |
Resist hailstone | Φ 25mm |
Resist wind | 30m/s |
Heat Pipe |
Material | TU1 copper |
Length | 1790mm |
Condenser material | SUS316L |
Diameter | Condenser dia 14mm, body dia 8mm |
Contact sheets | Aluminum fin |
Support Frame |
Material | Galvanized Steel |
Thickness | 1.5mm |
Angle | 50° |
Others |
Working pressure | 6Bar |
Daily efficiency | ≥ 55% (≥ 42% in winter) |
Working temperature | 60° C ~ -35° C |
Lifetime | 15 years |
Optional |
Controller | SR609, 35 USD/Pc |
Electric Heater | 1500W /2000W, 10 USD/Pc |