Suntask Heat Pipe Solar Collector with CPC reflectors
Model No: SHC-8/9/10/12/14/15/1618/20/21/22/24
This solar collector have the largest aperture area and more power output, especially suitable use for Poland new subsidy policy.
 

ADVANTAGE

1. Easy to install and transport.
2. have the largest aperture area and highest power output
3. The stagnation temperature of SHC is 280 °C.
4. specially designed for Poland market.

Vacuum solar collector working principle:

1. The heat pipe series vacuum solar collector are always connected with existing heating supply device.

2. The selective coating on the inner Cover of the evacuated tubes converts solar energy into heat energy and transfers heat to the heat pipes by aluminium fins.

3. The liquid in the heat pipe changes into vapour which rises to the condenser.

4. The heat then passes through the heat exchanger and the vapour becomes liquid, returning to the base of the heat pipe.

5. The heat conducts to the heat transfer liquid (anti-freezing liquid or water) via a copper pipe.

6. This transference of heat into the liquid creates a continuous circulation as long as the collector is heated by the sun.

Vacuum solar collector specification
1. Manifold (interior): 0.8mm thickness Red copper 
2. Manifold (exterior): 2.0 mm thickness Aluminum alloy 
3. Glass tube dimensions: 58mm x 1.800mm

4. Insulation layer: 45mm thickness glass firber /polyurethane layer 
5. Heat preservation: 72-96hrs 
6. Hail resistance: 25mm 
7. Max pressure: 6 bar 
8. Coating of vacuum tube: Ss-c/cu 
9. Frame: 2.0mm thickness Aluminum Alloy